Getting started

One phone for your TV and PC

Use your phone as a Wi-Fi remote for a TV or streaming box,
or a Bluetooth mouse and keyboard for a PC.

WindTouch does not provide an infrared (IR) remote.
Bluetooth input requires HID support on the phone and target device.
Wi-Fi TV setup is independent of Bluetooth pairing.

Use the 3-day trial to test your own devices before purchasing.
There is no automatic charge when the trial ends.

Quick start

1. Choose a targetIn Remote, tap Switch → Wizard.
   Choose TV / set-top box or PC.Connection steps
2. Approve on the other deviceAllow the TV request or enter its PIN in WindTouch.
   For Bluetooth, confirm matching PINs on both devices.
3. Test actual operationAfter communication is confirmed, try an arrow key or pointer movement.
   Connection status and actual button operation are separate checks.

Connect and switch devices

Connect a TV or streaming box

1. Connect the phone and TV/box to the same router.
   A TV connected by Ethernet can also work when it is reachable on the same network.
2. Open Remote → Switch → Wizard → TV / set-top box → Find Wi-Fi TV.
3. Tap the discovered device to start connecting.
   Use the TV remote to Allow its request, or enter the PIN shown on the TV in WindTouch.
4. When communication is confirmed, open a menu on the TV and tap Test left arrow.
   If the selection moves, choose It works · Finish.

Enter the IP address if discovery fails

Tap the manual-selection button below the search results.
Find the TV IP address in its network settings.
Enter the address, such as 192.168.0.11, and check the TV at that IP.

Guest and public networks may block discovery or communication between devices.
Entering a public IP does not bypass a firewall or provider restrictions.
The phone still needs a network route to the device.

Connect a PC over Bluetooth

1. Enable Bluetooth on the phone and PC.
   Windows: Settings → Bluetooth & devices → Add device → Bluetooth.
2. From Mouse or Keyboard, tap Switch → Find TV/PC from your phone and select your PC.
3. Confirm matching PINs on both devices.
   Wait for the HID input connection after pairing.
4. Select a document or the desktop on the PC.
   Test pointer movement, clicking and a short text entry.

If the PC cannot be found, use Make my phone visible to TV/PC and allow discovery.
Within two minutes, select the phone in the PC’s Bluetooth add screen.
On a TV, use its keyboard/input-device menu, not the speaker/audio menu.

Saved devices and removal

Tap a saved Wi-Fi or Bluetooth item to connect immediately.
The Remote picker remembers the last Wizard / Wi-Fi / Bluetooth tab.
PC/TV only filters both saved devices and discovery results.

Hold an item to open a Delete / Cancel confirmation.
After removing Bluetooth pairing, check for a remaining phone entry on the PC or TV as well.

Switching to a Wi-Fi target disconnects the existing Bluetooth input link.
Do not assume a lost Wi-Fi connection automatically falls back to Bluetooth.
Choose the desired device and connection type using Switch.

Phone audio plays on the TV

Open the TV’s details in the phone’s Bluetooth settings.
Disable an unwanted audio connection and check input-device pairing separately.
Wi-Fi remote control is independent of Bluetooth audio.

Discovery, pairing and mouse/keyboard connection are separate stages.
After approving the PIN, verify actual pointer movement.

Getting started screens